UNITECH ZIPPER & MACHINERY Co., LTD





"Molds"

Top-stop Mold

Bottom-stop Mold

Zipper Mold

Open-end Mold

Two-ways Mold


  • There are many kinds of
    zipper mold to meet
    customer's choice.

  • Mold Length:12", 14"(13.5"),
    16" or customer's demand.

  • Zipper specification: #3, #4,
    #5, #8, #10, #7 fine teeth,
    #25, and special design.

  • The shape of teeth: Customer's
    choice.

  • Special design: Teeth with or
    without top-stops...etc.




"Machinery"

Type Features

V-5
Plastic Zipper Injection Molding Machine


  • High quality zipper can be produced at a
    short production cycle time.

  • The process has low labor cost that a
    operator can take care of several machines
    simultaneously.

  • Various types of plastic zipper can be
    produced by changing mold.

  • This machine has been designed to take
    less space.

  • Mold opening & clamping and injection unit
    are adjusted by two linear transducers.

V-1
Open end Injection Molding Machine


  • This machine utilizes a reciprocation-screw
    method that the screw drive delives a more
    homogeneous melt for injection.

  • Pin, box, and top stops are completed at one
    shot.

  • Close-end M/C need different mold, locator,
    and pulling tapes transmission attachment.

  • There are two kinds of process:

    1. After slider mounted, top-stops &
      bottom-stop are completed at one
      shot.

    2. Top-stop with zipper teeth were
      injected; then slider was mounted.
      Zippers with top-stop & sliders feed
      into machine to get bottom-stop.

V-M
Semi-Auto Injection Molding Machine


  • Can produce top-stop, bottom-stop,
    open-end, or two-ways by changing
    different molds.

  • Semi-auto machine.




Specification & Technical Data

ITEM \ TYPE UNIT V-5 V-1 V-M
Screw Diameter mm X25 X20 X20
Shot Volume Max. c.c 68.7 29.0 15.7
Shot Weight Max.(P.O.M.) g 96.0 40.6 21.9
Plasticizing Capacity Kg / hr 16 9 9
Injection Pressure Kgf / cm2 2,150 1,899 1,715
Injection Rate c.c / sec. 49.6 23.3 23.3
Screw Speed r.p.m. 10 - 200 10 - 160 10 - 160
Mould Clamping Force ton 35 10 10
Mould Clamping Stroke mm 200 180 180
Ejector Stroke mm 45 35 35
Pump Drive Hp / p 7.5/6 3.0/6 3.0/4
Heating Wattage Kw 3.1 2.2 2.0
Heating Zone -- 3 2 2
Oil Tank Capacity L 130 100 75
Pump Pressure Kgf / cm2 210 210 140
Machine Dimensions M 2.20x0.75x2.96 1.65x0.85x2.6 0.78x0.88x2.6
Machine Weight ton 1.6 0.75 0.65




E-mail Address: uzm@uzm.com.tw